Table of Contents
Advertisement
11.2.2 Navigation Commands
The following MIB Navigation commands allow you to move from MIB
object to MIB object within the MIB tree.
branch:
Syntax:
Description:
Options:
Example:
cd:
Syntax:
Description:
Options:
Example:
MicroMMAC Local Management User's Guide
MIB Navigator Command Set Overview
branch [path]
The branch command displays all of the leaves
in the MIB tree below a specified path. The
information displayed includes the pathname,
the object ASCII name, the type of object (i.e.,
integer, counter, time tick, etc.), and the current
value of each leaf object.
Not Applicable
MIBNav-> branch
# /1/3/6/1/2/1/7/1
udpInDatagrams
# /1/3/6/1/2/1/7/2
udpNoPorts
# /1/3/6/1/2/1/7/3
udpInErrors
cd [path] or cd [option]
The cd command allows you to change
directories within a MIB subtree (branch). The
path specified must be valid, or the MIB
Navigator will not perform the cd operation.
.. Moves you one subtree above the current one.
/ Moves you to the root.
MIBNav-> cd iso/org/dod/internet/mgmt
COUNTER
38216
COUNTER
0
COUNTER
0
051456
051457
Page 11-5
Advertisement
Table of Contents
