U-Match Series DC Inverter Service Manual
4 DISASSEMBLY AND ASSEMBLY
PROCEDURE OF MAIN PARTS
4.1 Outdoor Unit
24k
Disassembly and Assembly of external casing
Remark :
Step
1. Remove external casing
2. Remove motor
3. Remove compressor
4. Assemble unit
Illustration
106
Handling Instruction
1. Remove the top cover and handle;
2. Remove the grille, outer case, front
side plate and right side plate.
1. Remove the blade nut and then
remove the blade;
2. Remove the motor from motor
support.
1. Discharge the refrigerant inside the
pipeline and recycle the refrigerant
during discharging;
2. Unsolder the 4-way valve assy from
compressor;
3. Remove the nut fixing compressor;
4. Take away the compressor from
chassis.
Assemble the unit in the reverse
procedures of disassembly.