Gree U-MATCH Series Service Manual page 117

U-Match Series DC Inverter Service Manual
8. Mount the fan and
tighten the fixing bolts
9. Mount the water tray
and tighten the screws
Removal and Installation of Drainage Pump
Step
1. Loosen the screws
fixing the water tray
2. Remove the water tray
3. Pull out the water outlet
pipe and loosen the
screws fixing the water
pump.
Illustration
114
Mount the fan and use spanner to
tighten the bolts fixing the fan.
Use screwdriver to loosen the screws
fixing the water tray.
Handling Instruction
Use screwdriver to loosen the screws
fixing the water tray.
Remove the water pump and replace it.
Pull out the water outlet pipe and use
screwdriver to loosen the screws fixing
the water pump.