Gree U-MATCH Series Service Manual page 114

2. Disassembly of electric
parts box
Disassembly of water-containing plate
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
1.Disassembly of cover plate
2.Disassembly of
water-containing plate
Disassembly of fan and motor
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
Disassembly of fan motor
Illustration
Illustration
U-Match Series DC Inverter Service Manual
Disassemble the fastening screw and
remove the electrical parts box. (As is
shown in the graph, there are 2
fastening screws in the circle and the
screws in the direction of arrow shall be
disassembled too.)
Handling Instruction
Disassemble the fastening screws on
the cover plate and remove the cover
plate. (As is shown in the graph, circle
represents 6 fastening screws under
the cover plate and the box represents
two
water-containing plate symmetrically
arranged both on left and right.)
Disassemble the fastening screws on
the water-containing plate, pull upward
and remove the water-containing plate.
Disassembled water-containing plate is
shown in the graph.
Handling Instruction
Disassemble the fixing screws on the
fan components. (As is shown in
graph, circle represents 6 screws.)
Disassemble the fastening screws on
the fan and motor. Remove the fan.
(As is shown in the graph, box
represents screws.)
111
fastening screws on