4 DISASSEMBLY AND ASSEMBLY
PROCEDURE OF MAIN PARTS
4.1 Outdoor Unit
18k
Step
1. Remove external casing
2. Remove motor
3. Remove compressor
U-MATCH SERIES DC INVERTER AIR CONDITIONERS SERVICE MANUAL
Disassembly and Assembly of external casing
Remark :
Illustration
96
Handling Instruction
1. Remove the top cover and handle;
2. Remove the grille, outer case and right
side plate.
1. Remove the blade nut and then
remove the blade;
2. Remove the motor from motor support.
1. Discharge the refrigerant inside the
pipeline and recycle the refrigerant
during discharging;
2. Unsolder the 4-way valve assy from
compressor;
3. Remove the nut fixing compressor;
4. Take away the compressor from
chassis.