Gree U-MATCH Series Service Manual page 111

U-Match Series DC Inverter Service Manual
5. Assemble unit
48/60k：
Disassembly and Assembly of external casing
Remark :
Step
1. Remove external casing
2. Remove motor
3.Remove gas liquid
separator.
Illustration
108
Assemble the unit in the reverse
procedures of disassembly.
Handling Instruction
1. Remove the top cover and handle;
2. Remove the grille, outer case and
right side plate.
1. Remove the blade nut and then
remove the blade;
2. Remove the motor from motor
support.
1. Discharge the refrigerant inside the
pipeline and recycle the refrigerant
during discharging;
2. Unsolder the 4-way valve assy
from gas liquid separator;
3.Remove the gas
separator.
liquid