Gree U-MATCH Series Service Manual page 37

U-Match Series DC Inverter Service Manual
7.1.3 Functions of Press Buttons
No. Name
1 Mode
2 Fan
3 On/Off
▲
4
▼
5
Mon
6
1/9
Tue
7
2/10
Wed
8
3/11
Thu
9
4/12
Fri
10
5/13
Sat
11
6/14
Sun
12
7/15
13 8/16
14 Timer/Time
15 Central
16 Shield
17 All on/off
7.1.4 LCD of the Controller
7.1.4.1 Outline Drawing of the LCD
Table 2-7-1 Functions of Press Buttons
It is used for the switchover among different modes.
It is used to set the fan speed, high, medium, low or auto.
It is used to set the on/off status of the indoor unit.
1. Under the single/centralized control status: It is used to set the running temperature
of the indoor unit with max.30
2. Under the timing setting status: It is used to set the timing period with max.24 hours
and min.0 hour;
3. Under the clock setting status: it is used to set the hour (max.:23, min.: 0) and minute
(max.:59, min.: 0) of the clock.
It is used for the switchover between unit 1 and unit 9;
Under the timing or clock setting status, it indicates Monday.
It is used for the switchover between unit 2 and unit 10;
Under the timing or clock setting status, it indicates Tuesday.
It is used for the switchover between unit 3 and unit 11;
Under the timing or clock setting status, it indicates Wednesday.
It is used for the switchover between unit 4and unit 12;
Under the timing or clock setting status, it indicates Thursday.
It is used for the switchover between unit 5and unit 13;
Under the timing or clock setting status, it indicates Friday.
It is used for the switchover between unit 6 and unit 14;
Under the timing or clock setting status, it indicates Saturday.
It is used for the switchover between unit 7 and unit 15;
Under the timing or clock setting status, it indicates Sunday.
It is used for the switchover between unit 8 and unit 16.
It is used to set the timing or on/off time of the selected indoor unit as well as to set the
clock of the system.
It is used for the switchover between single and centralized control modes.
It is used to deactivate some or all functions of a single or a group the indoor unit(s).
It is used to start/stop all indoor units.
Figure 2-7-2
Function Description
° C anmin.16 ° C ;
34