U-Match Series DC Inverter Service Manual
2 WIRELESS REMOTE CONTROLLER
2.1 Operation and Display View
Table 2-2-1 Operation instruction of wireless remote controller
No.
Name
Signal
Signal transmitter
transmitter
Press this button and the unit will be turned on; press it once more, and the unit will be turned
ON/OFF
button
By pressing this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto
MODE
button
Preset temperature can be decreased by pressing this button. Pressing and holding this
- button
Preset temperature can be increased by pressing this button. Pressing and holding this button
+ button
off. When turning off the unit, the Sleep function will be canceled, but the presetting time is still
remained.
mode is default after power on. Under the Auto mode, the setting temperature will not be
displayed; Under the Heat mode, the initial value is 28° C (82° F);Under other modes, the initial
value is 25° C(77° F).
AUTO;
COOL;
button for more than 2 seconds can make the temperature changed quickly until release this
button and then transmit this order. The temperature adjustment is unavailable under the Auto
mode, but the order can be sent by pressing this button. Centigrade setting range: 16-30;
Fahrenheit scale setting range 61-86.
for more than 2 seconds can make the temperature changed quickly until release the button
and then transmit this order. The temperature adjustment is unavailable under the Auto mode,
but the order can be sent by pressing this button. Centigrade setting range: 16-30; Fahrenheit
scale setting range 61-86.
Function Description
DRY;
FAN;
HEAT (only for cooling and heating unit)
16