Table of Contents
Advertisement
CBU-NM
User Manual
5.8 The Network Database
PCNC version 0.27 does not provide a specific SNMP (as opposed to
local/remote) device option for devices on the Network Database.
SNMP devices should be defined in the Database as though they were
local, allowing PCNC to decode the alerts correctly.
5.9 Trap Format
The MIB file describes the SNMP trap format as generated by PCNC
with the ForwardTrapsToNms setting in PCNC.INI set to On . With the
ForwardTrapsToPcnc setting On , PCNC simply encapsulates alert
strings in the SNMP trap format. See section
settings. See section
The traps generated by having the ForwardTrapsToPcnc setting On
were used during development to assist whilst debugging the SNMP Link
trap reception code. Normally, you should leave this option Off .
5–8
ii
13.2
for details of the trap formats.
7.13
for details of these
80-60100000-02
Advertisement
Table of Contents
