Cabletron Systems CBU-NM User Manual page 77

10.10 Network | Talkwire list...
Purpose:
Menu keys:
Speed Menu:
To enable:
10.11 Network | Direct connect
Purpose:
Menu keys:
Speed Menu:
To enable:
10.12 Network | Direct disconnect
Purpose:
Menu keys:
Speed Menu:
To enable:
80-60100000-02
Lets you view and edit the list of KBU64 devices
which have been nominated to act as Talkwire Units.
These units are local devices which are used by the
Direct Connect facility to communicate with remote
devices. See Section
Alt-N + T
Network Inspector window, Control Terminal window.
Always enabled, but you must have at least one
local KBU device in the Network Database to use
the Talkwire List.
Opens the Control Terminal window and issues all
the commands necessary to connect to a network
device. See also Section 4.5.
Alt-N + C
Network Inspector window.
Activate the Network Inspector window and select
the device to which you wish to connect. For direct
connection, the Control Link must be enabled in
PCNC.INI, and the Control port must be available.
Breaks the Control Terminal connection to the
currently connected device.
Alt-N + D
Network Inspector window, Control Terminal window.
Enabled whenever a device is connected.
Commands
4.5.3 for details.
10–5