Cabletron Systems CBU-NM User Manual page 48

CBU-NM
User Manual
6.3 Requirements
To run the basic PCNC program to receive and process alert messages,
you will need the Hardware and Software outlined in Section 1.7.
To run the SNMP Link you will also need the following:
An NDIS-compliant network interface card or other device suitable
for connecting the PCNC computer to your TCP/IP network.
An NDIS driver for the above.
Software to support TCP/IP, called Chameleon TCP/IP for
Windows, by NetManage .
PCNC's SNMP extensions, which are supplied on Disk 3.
6.4 What is on the distribution disks?
The basic PCNC is supplied on 2 disks. The first disk contains
the main PCNC program files (PCNC.EXE and its related DLLs)
a file containing default setup information (PCNC.INI)
the Help file (PCNC.HLP)
Disk 2 contains the Borland class libraries.
The file PCNC.DAT contains information you enter about your network,
and is therefore not included in the distribution disks. It will be created
when you first run PCNC. This file will need to be preserved during any
updates to the program, so make a backup copy of it if you are
upgrading.
A default PCNC.INI file is shipped with the program, though it will
probably need to be altered to run with your network, as described in
Chapter 7.
If you will be using the SNMP Link, you should also have a third 'SNMP
extensions' disk, which contains the optional SNMP files and a MIB file
for installation into your NMS.
6–2 ii 80-60100000-02