Cabletron Systems CBU-NM User Manual page 56

7.4 Format of the PCNC.INI File
The PCNC.INI file contains several sections, each of which consists of a
group of related settings. The sections and settings are listed in the
PCNC.INI file in the following format:
[section name]
option=value
The option must be followed immediately by an equals sign and the
value, with no spaces in the entry. Where the value is a string or a
filename, you can use any combination of upper and lower case letters.
7.5 Changing the PCNC.INI settings
To change the values of the settings, open the PCNC.INI file and edit it
using a text editor, such as Notepad. It is a good idea to make a backup
copy of the PCNC.INI file before you edit it. Once you have made the
changes, save the new PCNC.INI file and run PCNC.
PCNC only reads PCNC.INI when it loads, so if you changed the
configuration while it was running, you will need to restart the program.
7.6 Configuring PCNC.INI
When you are configuring PCNC.INI, you will need to do the following:
Choose which Links you need.
Decide which physical serial port each will use. You may need to
add ports if you plan to use all three serial links.
Find out which COM port applies to which serial socket.
Edit PCNC.INI to set up the Port definitions.
Edit PCNC.INI to set the required SNMP settings (if any).
You may also wish to change the preferences for the Audible
warning, Terminal emulation etc.
The default values for the other entries are optimised for PCNC - there is
no need to change these.
80-60100000-02
Configuring PCNC.INI
7–3