Cabletron Systems CBU-NM User Manual page 53

you have the program running properly. Refer to Chapter 7 - Configuring
PCNC.INI for details, and copy any unchanged settings into the new
PCNC.INI.
Once you have done this, carry out the steps outlined in Section
and, if applicable, Section
6.7 Drivers
Versions of PCNC before 0.27 required the use of a separate Device
Driver DLL file for each device type PCNC needed to recognise.
Version 0.27 no longer requires these files, and they can be deleted from
your working directory. The files are simply named after the device type
they supported eg KBU64.DLL.
If you are editing your old PCNC.INI file to produce one for version 0.27,
you should delete the [Device drivers] section and the Device= entries
within it. Much of the [SNMP Link] section is also obsolete. Any entries
that do not appear in this manual can be deleted.
80-60100000-02
6.5.7 to test that PCNC is working correctly.
Installing PCNC
6.5.6
6–7