Table of Contents
Advertisement
CBU-NM
User Manual
this, place the mouse cursor over a toolbar button, or pop up a menu and
drag the selection over the menu commands.
The on-line help also gives information about these commands.
obtain help, press Shift-F1, and the cursor will change shape. Select a
command, and help will appear for that command.
The format of each entry in this chapter is:
10.x Menu | Command
Purpose:
*Toolbar button:
Menu keys:
*Speed Menu:
*To enable:
* These entries may not be included if the command
has no toolbar button
is not accessible from a Speed Menu
is always enabled
ii
10–2
A description of what the command does.
Shows the icon that represents the command on the
toolbar.
Tells you which keys to press if you want to access a
command using the keyboard. These are the same
letters as are underlined in the heading. To invoke a
command, press Alt , then the Menu letter, then the
Command letter. For example, to add a new device
you could type Alt, N, N . It does not matter about
capitals.
Specifies a window.
button over this window, you will see a menu from
which you can select the command. This may be
easier than using the keys or the menu bar.
Some commands may not be available at all times
because they depend on another part of the
program. Any conditions on using the command will
be explained in this paragraph.
If you click the right mouse
80-60100000-02
To
Advertisement
Table of Contents
