Table of Contents
Advertisement
7.9.2 Emulation=<string>
TTY
Default:
Purpose:
Tells the Auxiliary Terminal window which type of terminal to
emulate. Valid entries are: ANSI , VT52 , VT100 , and TTY .
7.9.3 BreakHandling=<boolean>
Default:
On
Purpose:
The BreakHandling entry specifies whether the Cabletron
Network Controller generates the line break condition. Valid
entries are On and Off .
If BreakHandling is turned off, line breaks are not
generated. If it is turned on, line breaks occur for a period of
time (decided by the BreakLength entry) when you press
Ctrl-Break or Ctrl-C.
7.9.4 BreakLength=<integer>
Default:
500
Purpose:
Specifies the duration (in milliseconds), of the line break.
This entry can take any value between 55 and 20000, and is
ignored if BreakHandling is set to Off .
7.9.5 Handshaking=<string>
Default:
XonXoff
Purpose:
Specifies which Handshaking scheme to use for the Auxiliary
Link. Valid entries are None , DtrDsr , RtsCts and XonXoff .
7.9.6 ForegroundColour=<integer>
Default:
-1
Purpose:
Controls the foreground colour used by the Auxiliary
Terminal. The value of each entry can be -1 or a value
between 0 and 15.
The value of -1 causes the Cabletron Network Controller to
choose a default colour that depends on the Emulation
80-60100000-02
Configuring PCNC.INI
7–7
Advertisement
Table of Contents
