Before You Start - Cabletron Systems CBU-NM User Manual

6.5 Installing PCNC for the first time
The following diagram shows the steps required to install PCNC both
with and without SNMP extensions:
PCNC Installation Guide
Basic
Create working directory C:\PCNC
Copy files from
D i s k s 1 a n d 2
C o n f i g u r e P C N C . I N I w i t h o u t S N M P
C r e a t e P C N C P r o g r a m G r o u p a n d I c o n

6.5.1 Before you start

Check that your PC meets with the requirements in Section 6.3.
Set up the
Chapter 9 - Equipment setup contains details of how to configure the
devices to communicate with PCNC.
Connect up the ports as described in Section 7.3.
Optional sections for the SNMP Link are marked with an asterisk (*)
and can be skipped if you are not using this facility.
80-60100000-02
S N M P
S e t u p N e t w o r k
H a r d w a r e
Install and test
C h a m e l e o n
Copy files from
Disks 1 - 3
T e s t P C N C
Install
F I V M E R E . M I B
R e c o n f i g u r e
P C N C . I N I f o r S N M P
T e s t P C N C
w i t h S N M P
Figure 6.1 - Installation process
equipment on
Installing PCNC
Section
6.5.2
5.5
6.5.3
6.5.3
7.6
6.5.5
6.5.6
6.5.7.1
7.13
6.5.7.3
your Cabletron network.
6–3