Toro Reelmaster 3100-D Operator's Manual page 25

Figure 32
1. Hood-latch bracket
3. While aligning the mounting holes, position the
CE lock bracket and the hood-latch bracket onto
the hood. The lock bracket must be against the
hood (Figure 33). Do not remove the bolt and
nut assembly from the lock bracket arm.
Figure 33
1. CE lock bracket
4. Align the washers with the holes on the inside of
the hood.
5. Rivet the brackets and the washers to the hood
(Figure 33).
6. Hook the latch onto the hood-latch bracket
(Figure 34).
g012628
2. Rivets
g012629
2. Bolt and nut assembly
1. Hood latch
7. Screw the bolt into the other arm of hood-lock
bracket to lock the latch in position
Note:
Tighten the nut and bolt until the bolt no
longer moves forward and backward in the CE
lock bracket.
1. Nut
2. Arm of hood-lock bracket
25
Figure 34
(Figure
Figure 35
3. Bolt
g354465
35).
g350021