Standards And Approvals - Siemens SIMATIC IPC1047E Operating Instructions Manual

Standards and approvals

Note
Approvals on the rating plate
The following overview provides information on possible approvals.
Only the approvals printed on the rating plate apply to the device.
The device meets the general and safety-related requirements of the following directives and
conforms to the harmonized European standards (EN) published in the official gazettes of the
European Union:
• 2014/30/EU "Electromagnetic Compatibility Directive" (EMC Directive)
The device is designed for the following areas of application corresponding to the CE
marking:
The devices are compliant with EN 61000-3-2 (harmonic currents) and EN 61000-3-3
(voltage fluctuations and flicker).
• 2014/35/EU "Electrical equipment for use within specific voltage limits" (Low-Voltage
Directive)
Conformance with this standard has been verified according to EN 61010-2-201.
• 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
SIMATIC IPC1047 certificates (https://support.industry.siemens.com/cs/ww/en/ps/25596/cert).
ISO 9001 certificate
The Siemens quality management system for our entire product creation process
(development, production and sales) meets the requirements of ISO 9001.
This has been certified by DQS (the German society for the certification of quality
management systems).
SIMATIC IPC1047E
Operating Instructions, 03/2021, A5E50259546-AA
Area of application
Industry
Residential and commercial areas and small
businesses
Requirement for
Interference emission Immunity to interfer-
ence
EN 61000-6-4 EN 61000-6-2
EN 61000-6-3 EN 61000-6-1
10
113