Siemens SIMATIC IPC1047E Operating Instructions Manual page 32

Safety Instructions
2.4 Notes on ambient and environmental conditions
Damage from condensation
NOTICE
Damage from condensation
If the device is subjected to low temperatures or extreme fluctuations in temperature during
transportation, moisture could occur on or inside the HMI device (condensation).
Moisture can cause a short-circuit in electrical circuits and damage the device.
• Store the device in a dry place.
• Bring the device to room temperature before starting it up.
• Do not expose the device to direct heat radiation from a heating device.
• If condensation develops, wait approximately 12 hours or until the device is completely
32
dry before switching it on.
Operating Instructions, 03/2021, A5E50259546-AA
SIMATIC IPC1047E