Standards And Approvals; Ce Marking - Siemens SIMATIC IPC627E Operating Instructions Manual

Standards and approvals

10.1

CE marking

The device meets the general and safety-related requirements of the following directives and
conforms to the harmonized European standards (EN) published in the official gazettes of
the European Union:
● 2014/30/EU "Electromagnetic Compatibility Directive" (EMC Directive)
The device is designed for the following areas of application corresponding to the CE
marking:
● 2014/35/EU "Electrical equipment for use within specific voltage limits" (Low-Voltage
Directive)
Conformance with this standard has been verified according to EN 61010-2-201.
● 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
Certificate Box PC (http://support.automation.siemens.com/WW/view/en/10805671/134200).
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA
Scope of application
Industry
Residential and commercial areas and small busi-
nesses
The devices are compliant with EN 61000-3-2 (Transient currents) and EN 61000-3-3 (Voltage
fluctuation and Flicker).
Requirement for
Interference emis- Immunity to interfer-
sion ence
EN 61000-6-4 EN 61000-6-2
EN 61000-6-3 EN 61000-6-1
10
131