Standards And Approvals; Scope; Ce Marking - Siemens SIMATIC IPC PX-32A Operating Instructions Manual

Standards and approvals

10.1

Scope

Note
Scope
The possible approvals are described below. The approvals applicable to your device are
indicated on the nameplate.
10.2

CE marking

The device meets the general and safety-related requirements of the following directives and
conforms to the harmonized European standards (EN) published in the official gazettes of the
European Union:
• 2014/30/EU "Electromagnetic Compatibility Directive" (EMC Directive)
The device is designed for the following areas of application corresponding to the
CE marking:
• 2011/65/EU "Restriction of the use of certain hazardous substances in electrical and
electronic equipment" (RoHS Directive)
EU Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
Panel PC certificates
(http://support.automation.siemens.com/WW/view/en/10805572/134200).
76
Scope of application
Industry
Residential and commercial areas and small busi-
nesses
Requirement for
Interference emis- Immunity to inter-
sion ference
EN 61000-6-4 EN 61000-6-2
EN 61000-6-3 EN 61000-6-1
Operating Instructions, 09/2023, A5E53092695-AA
10
SIMATIC IPC PX-32A