Markings And Symbols; Overview; Safety; Operator Controls - Siemens SIMATIC IPC1047E Operating Instructions Manual

Markings and symbols

B.1

Overview

The following tables show all the symbols which may be found on your SIMATIC industrial PC
in addition to the symbols which are explained in the operating instructions.
The symbols on your device may vary in some details from the symbols shown in the
following tables.
B.2

Safety

Symbol Meaning
Warning, observe the supplied docu-
mentation.
Attention, radio equipment
Devices contain dangerous voltages
Follow the instructions
Disconnect the power plug before
opening
Only with drive cage type A with removable drives
1
B.3

Operator controls

Symbol Meaning
On/off switch
isolation
Only with single power supply
1
SIMATIC IPC1047E
Operating Instructions, 03/2021, A5E50259546-AA
, without electrical
1
Symbol Meaning
Front door is closed.
The removable drive tray is locked
Front door is open
Attention, ESD (Electrostatic sensitive
device)
Warning of hot surface
Symbol Meaning
On/off switch, without electrical isola-
tion
B
1
121