Installing And Connecting The Device; Preparing For Installation; Checking The Delivery Package - Siemens SIMATIC IPC1047E Operating Instructions Manual

Installing and connecting the device

3.1

Preparing for installation

3.1.1

Checking the delivery package

Electric shock and fire hazard due to damaged device
Damaged devices due to improper storage or transport may lead to personal injury and/or
damage to equipment.
Please make sure to observe the information in section "Notes on ambient and
environmental conditions (Page 30)".
Procedure
1. Check the packaging and package contents for visible transport damage.
If any transport damage is present at the time of delivery, lodge a complaint at the
shipping company in charge. Have the shipper confirm the transport damage
immediately.
2. Unpack the device at its installation location.
3. Keep the original packaging in case you have to transport the unit again.
4. Check the contents of the packaging and any accessories you may have ordered for
completeness and damage.
Please inform the delivery service immediately if the package contents are incomplete or
damaged or do not correspond with your order.
5. Please keep the documentation in a safe place. It is required for initial commissioning and is
part of the device.
6. Make a note of the identification data of the device (Page 34).
SIMATIC IPC1047E
Operating Instructions, 03/2021, A5E50259546-AA
WARNING
3
33