Table of Contents
Advertisement
Position of the fastening hole holes for telescopic rails
The fastening holes for the telescopic rails of the various manufacturers are labeled in the
following figure:
①
②
③
The telescopic rails are secured with M4 screws. The dimensions for the associated mounting
holes are listed in the section "Dimension drawing for telescope rails (Page 112)".
3.3
Connecting the device
3.3.1
Country-specific information on supply voltage
USA and Canada
Supply voltage 120 V / 230 V / 240 V
This device may only be connected to a grounded groundedSchuko socket outlet. Ensure that
the power cords used are rated for the maximum current input and ambient temperature of
the device and meet the requirements of the following standards:
• ANSI/UL 817
• CSA C22.2 No. 21
SIMATIC IPC1047E
Operating Instructions, 03/2021, A5E50259546-AA
Manufacturer Cooolcase, article number 3001758
Manufacturer Rittal, article number TS 3659.190 for 800 mm cabinets
Manufacturer Schroff, article number type 20110-072
Installing and connecting the device
3.3 Connecting the device
37
Advertisement
Table of Contents
