Ipmi Setup; Recycling And Disposal - Siemens SIMATIC IPC1047E Operating Instructions Manual

Device maintenance and repair

7.6 IPMI Setup

7.6 IPMI Setup
The IPMI Setup is documented in detail by the manufacturer:
IPMI (https://www.supermicro.com/solutions/IPMI.cfm).
The procedure is briefly outlined below.
Procedure
1. Set up the dynamic address assignment via DHCP
Alternatively, assign a fixed IP address, e.g. "192.168.10.253".
2. Establish a connection to IPMIView, see section "Monitoring functions (Page 50)".
3. Set up the remote control via iKVM, also with IPMIView.
7.7

Recycling and disposal

Legal statement regarding disposal of old devices
European law forbids disposal of electrical and electronic devices in household waste.
• Do not dispose the device or its replacement and expansion components in household
waste and not at public waste disposal points.
• For environmentally compatible recycling and disposal of the device and its components,
contact a certified disposal company for electronic waste or your Siemens contact
(product return (https://support.industry.siemens.com/cs/ww/en/view/109479891)).
Observe the following:
• Country-specific regulations
• Local legal requirements
• Special information regarding the German Battery Ordinance
102
Operating Instructions, 03/2021, A5E50259546-AA
SIMATIC IPC1047E