Standards And Approvals - Siemens SIMATIC IPC RW-543A Operating Instructions Manual

Standards and approvals

Note
Applicability
The following shows the approvals that may be available. For the device itself, it is
certificated as shown on the product label and package label.
EMC Directive:
2014/30/EU Directive of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to electromagnetic
compatibility; Official Journal of the EU L96, 29/03/2014, p. 79–106
Low Voltage Directive:
2014/35/EU Directive of the European Parliament and of the Council of 26 February 2014 on
the harmonisation of the laws of the Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits; Official Journal
of the EU L96, 29/03/2014, p. 357–374
RoHS Directive:
2011/65/EU Directive of the European Parliament and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment;
Official Journal of the EU L174, 1/07/2011, p.88–110
EMC
LVD
RoHS
ISO 9001 certificate
The Siemens quality management system for all production processes (development,
production and sales) meets the requirements of ISO 9001:2015, ISO 14001:2015 and ISO
45001:2018.
Certificate registration no. 01 100 1430201, 01 104 1430201 and 01 113 1430201.
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
EN 61000-3-2:2006 + A1:2009 + A2:2009, EN 61000-3-3:2013, EN 61000-6-
4:2007 + A1:2011, EN 61000-6-2:2005
EN 61010-2-201:2013
EN IEC 63000:2018
10
89