The Chorus; The Delay - Arturia TAE ORIGIN User Manual

The available effects are:
- CHORUS/ FLANGER
- DELAY
- REVERB
- DISTORTION
- STEREO ANALOG PHASER
For our sound, we'll choose the "Chorus" for the [Effect 1] slot and "St Delay" for the [Effect 2]
slot.

7.12.1 The chorus

The Chorus allows doubling and slight detuning of sounds with some cyclic movement in order to
make the sound deeper and livelier.
Adjust the knob [Dry/Wet] of the Chorus to balance between the original sound and the treated
sound.
Next, turn the knob [Rate] of the Chorus to set the speed of the oscillations.
Finally, set the Depth of the Chorus by turning the [Depth] knob.

7.12.2 The delay

The Delay brings a stereo echo effect that adds space to your sound. It possesses independent
settings for speed and the number of repetitions on the right and left channel. Therefore it is
possible to create a big number of rhythmic combinations between the repetitions. The delay times
can be synced to the MIDI tempo of your sequencer.
Set the [Dry/Wet] knob of the Delay to balance between the original and the treated sound
Set the [Link] option to "Off" and turn the 2 knobs [TIME L] /[ TIME R] to set the speed of the
repetitions for the right and left side: (Time Right/Time Left)
It is also possible to set the number of repetitions (Feedback) for each side ([Feedbk R] and
[Feedbk L])
ARTURIA – ORIGIN – USER'S MANUAL
Set the Depth of the Chorus
42