Modules - Arturia TAE ORIGIN User Manual

In this chapter you will find a description of all the modules included in the modular structure, the
[Edit] page.
All modules offer two different panels: a controllers panel and a connections panel.
The left panel includes all the dedicated real time parameters showing the main parameters of the
module; for example, the oscillator's range, coarse and fine tune, pulse width and waveform
selection parameters.
As a general principle, to set the parameters of the modules, press the [◄/►] /or [▲/▼]
buttons to select the desired knob of dialog box and press the jog dial to validate the selection
(highlighted in red).
Then, turn the dial to set the parameter.
NOTE: If you wish to manually edit an oscillator, filter, VCA, LFO and envelope modules, you can
use the hardware dedicated knobs or encoders situated included on the "analog control" panel, on
the left of the LCD screen.
Each module has audio and modulation inputs and outputs.
The right panel includes all the dedicated [Inputs] and [Outputs] audio or modulation connections.
To select the modulation input menus:
Go to the "connection" menu's box using the jog dial or the [▲/▼] or the [◄/►] buttons.
Press the jog dial or the [Enter] button to open the menu and select a new modulation input.
ARTURIA – ORIGIN – USER'S MANUAL
9

MODULES

The left panel of an oscillator module
The right panel of an oscillator module
104