Move] - Arturia TAE ORIGIN User Manual

When a module is selected/highlighted within the view, the [Change] button becomes active. When
selected, the button transitions to a drop-down list that includes the following choices:
- Origin
- ARP
- CS-80
- Minimoog
- Jupiter-8
To select an alternate choice, simply navigate to the desired selection using the jog dial or [▲/▼]
or [◄/►] buttons on the front panel and either press the jog dial or press the [Enter] button on the
front panel to commit the change. Where similar routing and settings can be preserved, the "new"
module adopts all of the settings and routing of the "old" module.
8.4.3.4

[Move]

The [Move] function is only available in the [patch] view. When pressing the [Move] button you can
move the currently highlighted module to any position in the patch view. This can be useful when
you have a complicated patch and want to get a clear overview of its structure.
ARTURIA – ORIGIN – USER'S MANUAL
Change an [Oscillator] module to a CS-80
72