Main] Tab - Arturia TAE ORIGIN User Manual

8.1.2

[MAIN] tab

From the [MAIN] tab, the LCD screen has four tabs available along the top row of buttons (from left
to right): [MAIN], [DEMO], [INFO] and [SYSTEM] at the far right corner of the screen. When editing
the SYSTEM SETTINGS for the Origin, this button position shows the HOME label that returns you to
the [MAIN] tab of the [HOME] page.
This section of the manual will focus on the [MAIN] tab while the following sub-sections of the
manual will describe the other tabs in greater detail.
On the main tab, you can browse directly through Origin's presets in a variety of ways.
Using the jog dial you can quickly scroll through the list of presets. A number displayed in black
means that its corresponding preset is currently loaded. When you scroll through the presets using
the data dial you only scroll the numbers which are displayed in red. A number displayed in red
means that its corresponding preset is not currently loaded. When you stop on a number, it
automatically loads the corresponding preset after 1 second.
Another method is pressing the [Sound Select] key pad. By pressing the numbers you can directly
jump to the preset of your choice.
If you press a 4 digit number, the corresponding preset can immediately be loaded. When you
press a 3, 2 or 1 digit number, the number you've just typed blinks in red and loads within two
seconds. For example if you press 0-0-5-2, preset 52 is directly loaded. When you only press 5-2,
number 52 blinks in red and the corresponding preset is loaded after two seconds.
By pressing the [+] and [-] keys you can increment or decrement the preset number by 1 on each
press. The corresponding preset is directly loaded.
The right area of the [MAIN] tab provides basic information on the selected preset through the
[PROGRAM/MULTI INFO]. This area shows [PROGRAM INFO] when a [PROGRAM] preset is selected
(location 0000-0999) and shows as [MULTI INFO] when a MULTI preset is selected (location 1000-
1255). When a PROGRAM is selected, the panel shows the preset ID, name, designer, project type
and synth template.
When a [MULTI] is selected, the panel shows the preset ID, name, designer and project.
ARTURIA – ORIGIN – USER'S MANUAL
The [Main] tab
The [PROGRAM INFO] area
45