The Step Sequencer - Arturia TAE ORIGIN User Manual

Select the [Project] box using the jog dial or [▲/▼] or [◄/►] buttons. Choose a name for the
project. If you select [NEW] then you can create a new project entry that can then be selected in
the future and available as a search value while browsing for presets.
Press the [Save] button again to validate the save function.

8.5.10 The Step Sequencer

The step sequencer uses up to 32 steps. It allows the creation of several melodic lines (when one of
the three available modulations is affecting the frequencies of the VCO), as well as creation of
dynamic modulations of other parameters such as the cutoff frequency of a VCF, or on the square
waveform width of a VCO.
The interface of the sequencer consists of three main parts:
ARTURIA – ORIGIN – USER'S MANUAL
Choose a name for the project
The sequencer page
83