Keyboard Section; Modulation Matrix - Arturia TAE ORIGIN User Manual

Table of Contents

Advertisement

-
[Glide]: This knob controls the glide (or portamento) time. If the [glide] switch in the
keyboard section in set to [On] (see below Keyboard section), this knob determines the
time a voice takes to glide from its previous pitch to a newly struck pitch.
-
[Mod. Mix] (modulation mix): This knob determines which signal is used for the filter or
oscillator modulation. It sets a mix between oscillator 3 at the fully left position and a low
frequency noise signal at the fully right position.

10.3.2.6 Keyboard section

This section contains all the settings concerning the interaction between your MIDI keyboard and the
Minimoog template.
-
[Glide]: This switch toggles the glide (or portamento) On or Off.
-
[Decay]: If this switch is set to on, the filter and loudness envelopes each have a release
time which is equivalent to their decay time. When set to off, the envelopes have no
release.
-
[Legato]: This switch turns the legato mode On or Off (this settings has no effect if a
polyphonic mode is selected in the [Output] section). In legato mode, playing a note while
another note is still held doesn't retrigger the envelopes. If this setting is set to Off, each
new note retriggers the envelopes.
-
[Bend]: This switch determines whether the Minimoog template responds to pitch bend
commands.
-
[Range]: This knob sets the pitch bend range for the Minimoog template (has no effect if
the [Bend] switch is set to [Off]).
-
[Pedal glide]: This switch activates or inhibits the glide action for the pedal.
-
[Pedal release]: This switch activates or inhibits the release action for the pedal.

10.3.2.7 Modulation matrix

The modulation matrix allows you to route up to 8 different modulation sources to up to 8 different
destinations within the Minimoog template. It is organized in 8 rows: each row contains a source
selector, a modulation amount knob and a destination selector. By default all selectors are set to
[Off] and all modulation amounts knobs are set to zero position.
ARTURIA – ORIGIN – USER'S MANUAL
The keyboard control section
135

Advertisement

Table of Contents
loading

Table of Contents