Add A Module To Your Preset - Arturia TAE ORIGIN User Manual

Saving as a preset
To save a "User" preset, click on the "Save" icon in the tools bar: the new settings are saved in
the preset currently selected without changing the name (if the preset being edited is part of the
factory presets, the factory settings will not be deleted).
WARNING! It is important to realize that changing the name of a preset does not create a new
one! Only the name of the preset being edited is modified.

7.7 Add a module to your preset

Origin is a modular synthesizer which means that it allows you to build your own synthesis structure.
You can do this by adding different modules into a virtual RACK and make all the needed
connections between them to make your sound. This way, you will explore one of Origin's most
interesting features, allowing you to create an infinite variety of sounds.
To have access to these features, go to the [Edit] page by pressing the button of the same name
under the LCD screen. The [Edit] page displays all the modules that make up the currently selected
program.
The [Edit] page offers two different interfaces: [RACK] and [PATCH]. You can toggle between them
using the rightmost button above the LCD screen.
The [RACK] interface is very basic: it shows a basic layout of all the modules that make up a
program without their connections.
The [RACK] view
The [PATCH] interface shows the synthesis diagram with all used modules with their audio,
modulation and trigger's connections. It is the best way to a global view of your sound construction.
ARTURIA – ORIGIN – USER'S MANUAL 32