Factory And User Presets; Loading A Preset - Arturia TAE ORIGIN User Manual

The "Crazy Fx", the audio inputs are connected into a bode frequency shifter and thru two filters
(one 4 Pole high pass and a 4 pole Low pass) modules connected in serial. This preset uses pre
connected to three effects: distortion, Delay and Stereo Phaser.
If you wish ear those effects modules, you just have to turn the [On/Off] buttons of the hardware
[Effects] panel "On".
8.2.2.4

Factory and User Presets

Origins can store 1000 Programs (in slots 0000-0999) and 256 Multis (in slots 1000-1255). The first
400 slots are loaded with factory programs, and the first 100 Multi slots are loaded with factory
multis. The remainder of those locations are available as "User" Preset slots. The Memory Protect
setting on the SYSTEM page controls whether memory locations can be overwritten by your edits. If
the Memory Protect setting is ON, then an edited Factory Preset that you choose to save
automatically selects the "Save Program As" dialog and present the first available "-EMPTY-" preset
location. You can also use the Dump function in order to move presets into and out of the Origin
from a host computer.
Aside from Factory Program and Multi Presets, there are also 128 Factory Sequence patterns that
are available through the Sequencer page.
8.2.3

Loading a Preset

Scrolling through the presets on the preset page works mostly the same way as on the home page.
By turning the jog dial you can quickly scroll through the list of presets. The current selected
preset is highlighted in black. To load the preset you want, highlight it and press the jog dial or the
[Enter] button on Origin's front panel.
Another method is pressing the [Sound Select] key pad.
By pressing the numbers you can directly jump to the preset of your choice.
When you press a four digit number, the corresponding preset is loaded immediately.
When you press a 3, 2 or 1 digit number, the number you've just typed blinks in red and loaded
within two seconds.
For example, when you press 0-0-5-2, preset 52 is directly loaded. When only press 8-3, number 83
blinks in red and the corresponding preset is loaded after two seconds.
By pressing the [+/-] keys you can increment or decrement the preset number by 1 on each
press. The corresponding preset is directly loaded.
If the [Preset] page is open, you can also use the [▲/▼] cursors to scroll through the presets.
They can be used in the same way as the [+/-] keys. By each press you can decrement or increment
one step in the preset list and the preset is directly loaded. The [▲/▼] cursors allow you to scroll
though lists of presets, this allows for faster searching. Using these knobs, the preset is not loaded
automatically. To load the preset, press the data "dial" or the [Enter] button.
ARTURIA – ORIGIN – USER'S MANUAL 54