Saving A Multi As - Arturia TAE ORIGIN User Manual

If you have edited one (or several) programs inside a Multi Preset, you can save those programs
as a new one exactly in the same way you should work on the Program mode.
Press the [Save] button again to validate the Save function.
NOTE: If you used Factory program presets, you can be prompted to save them to a User preset
location. This allows you to later edit them freely within the context of the Multi. Likewise with
the sequencer presets, in the case where a Factory preset is used, you are prompted to save the
step sequencer pattern to a new memory location.
8.5.9

Saving a Multi as...

You can change the location place or (and) the name of the current multi preset by using the [Save
As] option.
Select the [Save As] box using the [◄/►] cursors.
Confirm this selection by pressing the [Enter] or the jog dial buttons.
This directs you to the location number of the new preset. Turn the jog dial to select a new
location number (or use the key pads). Then, press the [Enter] button to validate the number
selection.
Then, go to the change the name, press the different key pads to enter the characters you wish
– letters or numbers- and press the [Enter] button to validate the name entry.
ARTURIA – ORIGIN – USER'S MANUAL
Save a Multi preset
Select the [Save as] box and select a new location number
82