Table of Contents
Advertisement
-
The [Mode 1, 2, 3] button allows selection of one of three connection configurations for
the joystick.
-
The [Assign] button directs you to the [Joystick] assign page.
4.1.4
"Analog" section
The "Analog" section contains all of the physical controls for the main synthesis parameters.
4.1.4.1
Oscillator section
-
The [Frequency] knob controls the "Coarse" frequency of the selected oscillator module.
-
The [Tune] knob controls the fine tune of the selected oscillator module.
-
The [Waveform] encoder selects the waveform of the selected oscillator module.
-
The [Select] encoder selects the oscillator module to edit in the current [Program]
preset.
4.1.4.2
Filter section
-
The [Cutoff] knob controls the cutoff frequency of the selected filter module.
-
The [Resonance] knob controls the resonance amount of the selected filter module.
-
The [Type] encoder selects the filter type of the selected filter module.
-
The [Select] encoder selects the filter module to edit in the current [Program] preset.
4.1.4.3
LFO section
-
The [Frequency] knob controls the frequency of the selected LFO module.
-
The [Waveform] encoder selects the waveform of the selected LFO module.
-
The [Select] encoder selects the LFO module to edit in the current [Program] preset.
4.1.4.4
Envelope section
-
The [Attack] knob controls the attack time of the selected envelope module.
-
The [Decay] knob controls the decay time of the selected envelope module.
-
The [Sustain] knob controls the sustain level of the selected envelope module.
-
The [Release] knob controls the release time of the selected envelope module.
-
The [Select] encoder selects the envelope module to edit in the current [Program] preset.
-
The [Time] knobs controls the pre-decay time of the selected envelope module.
-
The [Level] knob controls the pre-decay level of the selected envelope module.
NOTE: The CS-80 uses some specific parameters for its filter envelope: the "Initial level" and the
"Attack Level". These two parameters can be controlled by the [Time] and [Level] envelope knobs.
(See the "Modules Description" Chapter 10 for more details)
4.1.5
"Screen" section
In this area you can find the LCD screen and its dedicated pages, buttons and features.
ARTURIA – ORIGIN – USER'S MANUAL
17
Advertisement
Table of Contents
