The Three Types Of Presets - Program, Multi And New - Arturia TAE ORIGIN User Manual

The [Preset] page
Regardless of whether a Program or Multi is selected (described below), the general display layout is
similar. The left side of the display shows fields for selection criteria and a window with a range of
preset numbers and names. One preset in this window is always highlighted. The right side of the
display shows the info of the highlighted preset, with the information differing slightly between
Programs and Multis. Both preset types display preset ID, preset name, designer and project.
Program info displays additionally: synth template, CPU load, bank, and linked sequencer preset
(shows "none" when no sequencer preset is linked). Multi info shows a list of all the Programs used
in the Multi.
The bottom of the Preset page is the same as the Home Page. You can find the currently selected
preset number and name in the lower right corner of the display area. Likewise, you will see a
graphic representation of the program template that is selected. For individual programs, you can
see "PGM" in the lower left corner of the display area and one graphic that represents the type of
synthesizer template used as the basis for the patch. When a multi is selected, you can see "Multi"
in the lower left corner of the display with up to four graphics. These graphics represent the four
slots within the multi and correspond to the type of template used for each program within the
multi.
8.2.2
The three types of presets – Program, Multi and New
There are two tabs within the [Preset] Page, Program [PGRM] and Multi [MULTI]. When you select a
preset within a certain numeric range, the [Preset] page automatically "jumps" to the appropriate
tab as needed to show the correct Program/Multi data. Selecting a preset number from 0000-0999
jumps to the [PGRM] tab (if it is not already the active tab), values from 1000-1255 jumps to the
[MULTI] tab (if it is not already the active tab).
The preset tabs
ARTURIA – ORIGIN – USER'S MANUAL 51