Demo] Tab - Arturia TAE ORIGIN User Manual

In the lower portion of the [MAIN] tab you can also see the preset number and name in the lower
right corner of the display area. In the lower left corner you can see a graphic representation of the
[PROGRAM] template that is selected.
For a PROGRAM, you can see [PGM] in the lower left corner of the display area and one graphic that
represents the type of synthesizer template used as the basis for the preset.
Likewise, when a MULTI is selected, you can see [MULTI] in the lower left corner of the display with
up to four graphics representing the four slots within the multi program corresponding to the type
of PROGRAM templates used within the current MULTI preset.
When a PROGRAM is selected, the [PROGRAM INFO] panel contains a [PREVIEW] button. Selecting
this allows you to hear a sequenced performance that demonstrates the selected preset. If the
PROGRAM uses a step sequencer preset, the PREVIEW trigs the sequenced pattern.
To listen to a PREVIEW, simply load a preset as described above and press the jog dial or the [Enter]
button. The PREVIEW plays until it completes or it can be manually stopped by again pressing the
jog dial or the [Enter] button on the front panel. This is a very good way to gain a quick first
impression of the sound characteristics of program presets that are provided with your Origin
synthesizer.
8.1.3

[Demo] tab

The [DEMO] tab is a great place to quickly become acquainted with your Origin synthesizer.
To access the demo page directly, either select the [Demo] tab on the [Home] page or press the
[Demo] button on the front panel from any page on the Origin.
Press the [Demo] front panel button to play the first demo in the list of available songs.
The [Demo] button can be used to stop songs as well.
When a demo is playing, the back light behind the [Demo] button is active and the selected demo
has a red square at the far right of its name.
ARTURIA – ORIGIN – USER'S MANUAL
The Program [Preview]
The [Demo] page
46