Saving Your Program - Arturia TAE ORIGIN User Manual

encoder on the same section so that the screen pop-up displays [Osc 2 – Coarse Tune ...]. Press the
encoder to validate your choice. Now the [Frequency] knob (actually the entire [Oscillator] section)
is assigned to oscillator 2.
NOTE: You can set the volume of the four VCAs directly with the [Volume] knobs located in the
[Mixer] panel, on the right of the Origin interface. In this area, you can also directly mute their
activity by using the [ON / OFF] switches.

7.6 Saving your Program

By making just a few modifications, you have already edited the Program
save the sound you've just created. Origin allows you to create up to 600 User Programs.
Their numbers begin at 400 and proceed to 999.
To choose another destination number for the sound, simply click the [Save] button. This button
is located in the bottom of the central screen, under the Pages buttons.
Then, choose its location. For example, select the number [600]. The name [-EMPTY-] appears
on the screen.
Press on the jog dial and select the rename area.
Press the key pads them as you wish in the three sections.
ARTURIA – ORIGIN – USER'S MANUAL
Setting the frequency of oscillator 1
Press the [Save] button
"Reso_Pad". You can now
31