12.3 Uses cases and menus
12.3.1 Introduction
In this section we will see how to use the application. The first step is the connection. The best way
to do this is to connect Origin to the computer with the USB cable before launching the application.
When the application starts up, it downloads information about the presets. It can take a little
time. As long as loading is processing, the Origin panel is disabled. After that, the Origin panel is
enabled and it shows all the user presets.
If, for any reason, the connection is broken (for instance the USB cable is disconnected) or if you
launch Origin Connection without any Origin connected, the Origin panel will be automatically
disabled and no transfer between the computer and Origin is possible. Nevertheless, it is possible to
make transfer between Backups and Sound Banks. You have to click on the machine's switch button.
12.3.2 New sound banks
To create a new Bank, click on the menu Action > Create new Sound Bank and choose the
name of the new Bank. Then the bank appears in the computer navigator.
12.3.3 Backup
12.3.3.1 Creating new Backup
To create a new Backup, you have to click on the menu Action > Get new Backup. Then you are
invited to choose the name of the new Backup.
When you click on [OK] button the Backup process starts. It takes from one minute to several
depending on the number of presets to be saved.
You can cancel the Backup process by pressing the cancel button on the progress window.
ARTURIA – ORIGIN – USER'S MANUAL
Creating a new sound bank
Creating a new backup
155