Chorus - Arturia Moog Modular V User Manual

5.2.3

Chorus

Types
Time
Stereo Rate
VCA1-VCA2
Types
Rate
Depth
Time
Stereo Rate
Stereo Width
Dry
Wet
VCA1-VCA2
A Chorus module allows the treatment of the signal coming from the 2 output amplifiers, eventually
treated by the equalizer, in function with the state of the interrupters "vca1" and "vca2".
The chorus module allows a frequential blurring where the speed is set by the "speed" potentiome-
ter, the amplitude by the "depth" and the width with the "Delay". This frequency blurring is differ-
ent for the left and right tracks. This allows us to get a stereophonic signal from a monophonic sig-
nal. The difference between the 2 tracks can be set with the "stereo width" and the speed of the
left right rotation with the "stereo rate" potentiometer.
A selector presents the choice of chorus type: simple, medium, complex.
The input signal level and treated signal can be respectively set with the "gain direct" and "gain
effect" potentiometers.
ARTURIA – MOOG MODULAR V – USER'S MANUAL
Dry
Chorus
: Sets the 3 chorus Types
: Sets the chorus rate
: Sets the depth of the chorus action
: Sets the delay applied to the input signal
: Sets the speed of the stereophonic evolution
: Sets the width of the stereophonic space
: Sets the gain applied to the input signal
: Sets the gain applied to the treated signal
: Connection of the chorus to the output of VCA1 or VCA2
Rate
Depth
Stereo Width
Wet
93