Programming - Baileigh Industrial BP-3305CNC Operator's Manual

PROGRAMMING

This device has two programming methods, which are single-step programming and multi-step
programming. The user can set up programming according to actual demand.
At start up, the control screen will display the "Single" mode programing screen.
Pressing the key will toggle between the three main programming screens.
The Single screen may be
programmed directly to
complete a single
parameter bend. See the
steps to follow.
The "Programs" screen is used to program multi-step
bends. Each step is programmed similar to the single
bend, however they are grouped together into one
program that has many different bend settings.
See the steps to follow.
The "CONST" screen is a reference screen. DO NOT
make changes on this screen. This is also an access screen to deeper parameter settings.
28
28