Figure 175. Reinstall The Socket Cover; Figure 176. Processor Removal From Processor Carrier Clip And Processor Cold Plate - Intel D50TNP Integration And Service Manual

6. Reinstall the socket cover to protect the socket pins before proceeding to the next step
•
Squeeze the finger grips at each end of the cover and carefully lower the cover onto the socket. Then,
release the finger grips.
• Ensure the socket cover is locked in place.
Note: Do not press down on the center of the socket cover

Figure 176. Processor Removal from Processor Carrier Clip and Processor Cold Plate

7. While holding down the processor cold plate without stretching the hose, rotate the lever (see Letter A)
from left to right until the processor lifts from the processor carrier clip.
8. Holding down the processor carrier clip, carefully lift the processor and slide it out of the processor
carrier clip (see Letter B).
130
Intel® Server D50TNP Family Integration and Service Guide

Figure 175. Reinstall the Socket Cover