Intel® Server D50TNP Family Integration and Service Guide
3.7
Accelerator Module Add-in Card Installation (iPC – D50TNP2MFALAC Only)
The Intel® Server System D50TNP Accelerator Module includes a special riser assembly that can support up
to four x16 full height, full length, double width PCIe* add-in cards for acceleration solutions. The
Accelerator Module riser assembly is on the right side of the module.
Figure 77. Air-Cooled Accelerator Module
The Accelerator Module riser assembly houses two riser cards (shown in the following figures) where each
riser card supports up to two add-in cards. Both riser cards come pre-installed in the Accelerator Module
riser assembly.
Figure 78. Accelerator Module Riser Assembly
71