Processor Initialization Error Summary - Intel D50TNP Integration And Service Manual

Error Code
Recovery boot has been initiated.
Note: The Primary BIOS image may be corrupted or the
8607
system may hang during POST. A BIOS update is
required.
A100 BIOS ACM Error
A421 PCI component encountered a SERR error
A5A0 PCI Express component encountered a PERR error
A5A1 PCI Express component encountered an SERR error
DXE Boot Services driver: Not enough memory available
A6A0
to shadow a Legacy Option ROM.
F.1

Processor Initialization Error Summary

Table 13 describes mixed processor conditions and actions for all Intel server boards and Intel server
systems designed with the Intel® Xeon® Scalable processor family architecture. The errors fall into one of the
following categories:
• Fatal: If the system cannot boot, POST halts and displays the following message:
Unrecoverable fatal error found. System will not boot until the error is
resolved
Press <F2> to enter setup
When the <F2> key on the keyboard is pressed, the BIOS Setup error message is displayed on the
BIOS Setup Error Manager screen. An error is logged to the system event log (SEL) with the POST
error code.
The "POST Error Pause" option setting in the BIOS Setup does not have any effect on this error.
If the system is not able to boot, the system generates a beep code consisting of three long beeps
and one short beep. The system cannot boot unless the error is resolved. The faulty component must
be replaced.
The system status LED is set to a steady amber color for all fatal errors that are detected during
processor initialization. A steady amber system status LED indicates that an unrecoverable system
failure condition has occurred.
• Major: An error message is displayed to the BIOS Setup Error Message screen and an error is logged to
the SEL. If the BIOS Setup option "Post Error Pause" is enabled, operator intervention is required to
continue booting the system. If the BIOS Setup option "POST Error Pause" is disabled, the system
continues to boot.
•
Minor: An error message may be displayed to the screen or to the BIOS Setup Error Manager and the
POST error code is logged to the SEL. The system continues booting in a degraded state. The user
may want to replace the erroneous unit. The "POST Error Pause" option setting in the BIOS Setup
does not have any effect on this error.
Intel® Server D50TNP Family Integration and Service Guide
Error Message Action message
Disable OpRom at SETUP to save
runtime memory.
Type
Fatal
Major
Fatal
Minor
Fatal
Minor
219