Figure 190. Removing The Dimm Retention Clips; Figure 191. Removing The Dimm From A Liquid-Cooled System - Intel D50TNP Integration And Service Manual

2. Identify and locate the memory module to be replaced.
3. Use the memory removal tool as a lever and position one end between the DIMM retention clip and the
liquid-cooling loop (see Letter A).
4. Lift the DIMM retention clip from the liquid-cooling loop (see Letter B).
5. Using the memory replacement tool, open the ejection tabs at both ends of the memory slot
(see Letters A and B). The memory module will slightly lift from the slot.
6. Hold the memory module by its edges and lift it away from the slot (see Letter C).
138
Intel® Server D50TNP Family Integration and Service Guide

Figure 190. Removing the DIMM Retention Clips

Figure 191. Removing the DIMM from a Liquid-Cooled System