SEH myUTN utnserver Pro User Manual page 92

USB Deviceserver User Manual Linux
Table 8.3-3: Parameter list – IPv6
Parameters
ipv6
[IPv6]
ipv6_auto
[Automatic configura-
tion]
ipv6_addr
[IPv6 address]
ipv6_gate
[Router]
ipv6_plen
[Prefix length]
Table 8.3-4: Parameter list – Bonjour
Parameters
bonjour
[Bonjour]
bonjour_name
[Bonjour name]
Value Default
on/off on
on/off on
n:n:n:n:n:n:n:n : :
n:n:n:n:n:n:n:n : :
0-64 64
[1–2 characters; 0–
9]
Value Default
on/off on
max. 64 characters [Default
name]
[a–z, A–Z, 0–9]
Description
Enables/disables the IPv6 functionality of the
UTN server.
Enables/disables the automatic assignment of
the IPv6 address to the UTN server.
Defines an IPv6 unicast address in the format
n:n:n:n:n:n:n:n which is manually assigned to
the UTN server.
• Every 'n' represents the hexadecimal value of
one of the eight 16 bit elements of the ad-
dress.
• Leading zeros can be omitted.
• An IPv6 address may be entered or displayed
using a shortened version when successive
fields contain all zeros (0). In this case, two
colons (::) are used.
Manually defines a static router to which the
UTN server sends its requests.
Defines the length of the subnet prefix for the
IPv6 address. The value 64 is preset.
Address ranges (e.g. your network) are specified
with prefixes. To do this, the prefix length (num-
ber of bits used) is added to the IPv6 address as
a decimal number and the decimal number is
preceded by '/' .
Description
Enables/disables Bonjour.
Defines the Bonjour name of the UTN server.
The UTN server uses this name to announce its
Bonjour services. If no Bonjour name is entered,
a default name will be used (device
name@ICxxxxxx).
88