SEH myUTN utnserver Pro User Manual page 108

USB Deviceserver User Manual Linux
Table 8.3-18: Parameter list – USB device access control
Important:
Some parameters can be assigned to a USB port twice, e.g. two USB port keys per
USB port.
These parameters are assigned to the USB ports as follows:
USB port 01 = Parameter number '_01' and '_21' .
USB port 02 = Parameter number '_02' and '_22' .
Parameters
utn_accctrt_1
~
utn_accctrt_20
[Method]
utn_pkkey_1
~
utn_pkkey_40
[Key]
utn_vendprodIDs_1
~
utn_vendprodIDs_40
[USB device]
Value Default
--- ---
ids
key
keyids
max. 64 characters [blank]
[a–z, A–Z, 0–9]
max. 161 characters [blank]
Description
Defines the method(s) for limiting the access
and use of the USB port and the connected USB
device.
--- =no protection
ids =device assignment
key =port key control
keyids=device assignment and port key control
Defines the key for the USB port and the con-
nected USB device when port key control is
used.
Defines the VID (Vendor ID) and PID (Product ID)
of the USB device that is assigned to the USB
port via the device assignment.
Often VID and PID of a USB device are
unknown. We recommend configuration
via the utnserver Control Center Control
Center because VID and PID will be auto-
matically determined and entered with
this method.
104