USB Deviceserver User Manual Linux
4.5
How to Get Messages
The UTN server can send you different messages:
• Status email: Periodically sent email containing the status of the UTN server and of the connected USB devic-
es.
• Event notification via email or SNMP trap:
- System information (restart, network connections, power supply, temperature warnings, etc.)
- USB port and USB device information (enabling or disabling a USB port, connecting or disconnecting a USB
device, etc.)
You can customize the content of the e-mail subject line.
• Configuring the sending of status emails 35
• Configuring event and system notifications via email 35
• Customizing the email subject 36
• Configuring event and system notifications via SNMP traps 36
Configuring the sending of status emails
The status email can be sent to up to two recipients.
SMTP is set up 27.
DNS is set up 20.
1. Start the utnserver Control Center.
2. Select DEVICE – Notification.
3. Enter the recipient into the Email address box.
4. Tick the desired recipient(s) in the Status email area.
5. Define the interval.
6. To confirm, click Save.
The settings will be saved.
Configuring event and system notifications via email
The event emails can be sent to up to two recipients.
SMTP is set up 27.
DNS is set up 20.
1. Start the utnserver Control Center.
2. Select DEVICE – Notification.
3. Enter the recipient into the Email address box.
4. Tick the options with the desired messages.
5. To confirm, click Save.
The settings will be saved.
35
Need help?
Do you have a question about the myUTN utnserver Pro and is the answer not in the manual?