SEH myUTN utnserver Pro User Manual page 18

Usb deviceserver
Hide thumbs Also See for myUTN utnserver Pro:
Table of Contents

Advertisement

USB Deviceserver User Manual Linux
Some installation examples are given below.
• 'Installing the SEH UTN Manager in Ubuntu 20.0.4 (64-Bit) via Software Management'  14
• 'Installing the SEH UTN Manager in Ubuntu 20.0.4 (64-Bit) via Terminal'  14
• 'Installing the SEH UTN Manager in Red Hat Enterprise Linux Server (8)'  15
Important:
Knowledge Base articles with further installation information for Linux (e.g. instal-
lation of DKMS and the UEFI Secure Boot problem) are available at the SEH Com-
putertechnik GmbH website:
Installing the SEH UTN Manager in Ubuntu 20.0.4 (64-Bit) via Software Management
 Linux kernel 2.6.32 or later
 glibc 2.15 or later
 OpenSSL 1.0.1 or later
 DKMS (Dynamic Kernel Module Support) is installed on the client.
 The user used can gain root privileges via the command
1. Start installation package no. 1.
The Ubuntu Software appears.
2. Click Install.
A password prompt appears.
3. Authenticate yourself with your password.
The package will be installed on your client.
4. Repeat steps 1 through 3 with the remaining packages.
5. Add all users that are to administrate the SEHUTN Manager on the client to the user group 'utnusers'. To do
this, open a Terminal and enter the command:
sudo usermod -aG utnusers <username>
6. Logout and login again so that the group changes take effect.
 The SEHUTN Manager is installed on your client. Check the installation by starting the SEHUTN Manager (
16) and activating a connection to the USB port including the connected USB device. All information on this
can be found in chapter 'Working with the SEH UTN Manager'  37.
Installing the SEH UTN Manager in Ubuntu 20.0.4 (64-Bit) via Terminal
 Linux kernel 2.6.32 or later
 glibc 2.15 or later
 OpenSSL 1.0.1 or later
 DKMS (Dynamic Kernel Module Support) is installed on the client.
 The user used can gain root privileges via the command
1. Open a Terminal.
2. Install the headers for your kernel:
sudo apt-get install linux-headers-`uname -r`
https://www.seh-technology.com/services/knowledgebase.html
sudo
.
sudo
.
14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the myUTN utnserver Pro and is the answer not in the manual?

Table of Contents

Save PDF